User`s manual

100
d) From Mani menu->Setting->Schedule, you can go to Figure 5-36.
e) Select alarm channel, period and the record type shall be alarm. Please refer to chapter
5.6.2.
f) Click Copy button to copy current setup to other channel(s).
g) Click OK button to save alarm record information.
5.6.5.2 Alarm Snapshot
a) Please refer to Step a) to step c) of chapter 5.6.4.2 to enable timing snapshot.
b) From Main menu->Setting->schedule, you can go to Figure 5-36 to enable snapshot
function.
c) From Main menu->Setting->Alarm, you can go to Figure 5-40.to set alarm parameter
and enable snapshot function.
d) Click Save button to save alarm snapshot setup.
5.6.6 Manual Record/Snapshot
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
5.6.6.1 Manual Record
a) Right click mouse or in the main menu, Advanced->Manual Record. Manual record
menu is shown as in Figure 5-41.
Tips
You can click Rec button on the front panel (if possible) to go to the Manual Record interface.
Figure 5-41
b) Check the box here to select manual record channel(s). You can see the
corresponding indicator light on the front panel is on.
 Channel: It is to display device all channels.
 Manual: It has the highest priority. Enable corresponding channel to record no matter what
period applied in the record setup. Now system is record general file.
 Auto: System enables auto record function as you set in chapter 5.6.2 schedule interface
(General/Motion detect/Alarm)
 Stop: Stop current channel record/Snapshot no matter what period applied in the record
setup.
c) Click OK button to complete manual record setup.