User`s manual

96
 Channel: Please select the channel number first. You can select “all” if you want to set for the
whole channels.
 Week day: There are eight options: ranges from Saturday to Sunday and all.
 Pre-record: System can pre-record the video before the event occurs into the file. The value
ranges from 1 to 30 seconds depending on the bit stream.
 Redundancy: System supports redundancy backup function. It allows you backup recorded
file in two disks. You can highlight Redundancy button to activate this function. Please note,
before enable this function, please set at least one HDD as redundant. (Main
menu->Advanced->HDD Management). Please note this function is null if there is only
one HDD.
 Snapshot: You can enable this function to snapshoot image when an alarm occurs.
 Record types: There are four types: regular, motion detection (MD), Alarm, MD & alarm.
 Holiday: Highlight the button here, the holiday settings in General interface (Chapter 5.12.1)
becomes activated.
Please highlight icon to select the corresponding function. After completing all the setups
please click save button, system goes back to the previous menu.
At the bottom of the menu, there are color bars for your reference. Green color stands for
regular recording, yellow color stands for motion detection and red color stands for alarm
recording. The white means the MD and alarm record is valid. Once you have set to record
when the MD and alarm occurs, system will not record neither motion detect occurs nor the
alarm occurs.
Figure 5-36
Quick Setup
Copy function allows you to copy one channel setup to another. After setting in channel 1, click
Copy button, you can go to interface Figure 5-37. You can see current channel name is grey such
as channel 1. Now you can select the channel you wan to paste such as channel 5/6/7. If you wan
to save current setup of channel 1 to all channels, you can click the first box “ALL”. Click the OK
button to save current copy setup. Click the OK button in the Encode interface, the copy function