User`s manual

 You need to refer to your speed dome user’s manual for Aux definition. In some cases, it can

be used for special process.

 The following setups are usually operated in the Figure 5-24, Figure 5-26 and Figure 5-27.

Preset Setup

In Figure 5-24, use eight direction arrows to adjust camera to the proper position.

In Figure 5-26, click preset button and input preset number. The interface is shown as in Figure

5-28.

Now you can add this preset to one tour.

Figure 5-28

Activate Preset

In Figure 5-27, please input preset number in the No. blank, and click preset button.

Patrol setup (Tour Setup)

In Figure 5-26, click patrol button. The interface is shown as in Figure 5-29. Input preset number

and add this preset to a patrol (tour). For each patrol (tour), you can input max 80 presets.

Figure 5-29

Activate Patrol (tour)

In X341H341H341HFigure 5-26, input patrol (tour) number in the No. blank and click patrol button

Pattern Setup

In Figure 5-26, click pattern button and then click “begin” button. The interface is shown as in

Figure 5-30. Then you can go to Figure 5-24 to modify zoom, focus, and iris.

Go back to Figure 5-30 and click “end” button. You can memorize all these operations as pattern