User manual

82
SECTION 8: MULTI CLIENT SOFTWARE
8.5.2 Capture
A still-image of a screen can be captured in either Live mode or Search mode and saved as a BMP or JPEG le. To capture a still
image of the screen, click the Capture button. A Capture menu will open.
In the Capture menu, select the options you want, then click OK. An image of the screen will be saved at the location you
specied. By default, captured images are saved in the directory specied in the Setup / General menu. However, the Save Path
can be changed in the Capture menu if necessary.
8.5.3 Record
Video recording of the live screen can be manually started and stopped by clicking the Record button. When video is being
recorded, the Record button is highlighted blue. To stop recording, click the Record button again. By default, recorded video is
saved in the path specied in the Setup / General menu.
8.6 Remote playback and backup
The Multi Client can be used to search for and playback video clips in the DVR. Video clips can then be backed up to a local USB drive
or disk.
NOTE
The Event List may provide valuable information on when alarms and other events occurred. To open the Event List, click the
Events List button.
8.6.1 Remote playback
To search for and recorded video from the DVR:
1. At the Multi Client initial screen, connect to the DVR.
2. Click the Remote playback button. The client will open a Search mode window.