User manual
71960H H.264 DVR User Manual
SECTION 8: MULTI CLIENT SOFTWARE
SECTION 8
Multi Client Software
Multi Client software can monitor several DVRs (sites) simultaneously. It can display to up 256 live video channels on one screen,
playback video clips, control PTZ cameras, monitor alarms, and be congured with 2-way audio communication through the DVR.
NOTE
In a high bandwidth network, a maximum of four users can access one DVR simultaneously. In a low bandwidth network only
one user should access the DVR at a time.
8.1 PC Requirements
For the Multi Client software, the minimum PC requirements are:
• CPU: Intel® Pentium® IV, 2GHz or faster
• Memory: 512MB (1GB or larger is recommended.)
• VGA memory: 16MB (64MB or larger is recommended.)
• Resolution: 1024 x 768
• Disk space: 1GB
• Supported operating systems: Microsoft® Windows® 2000, Windows XP Professional, Windows XP Home, Windows 7
• Network: 10/100BASE-T network
• DirectX: DirectX 8.1 or higher
8.2 Installing the Multi Client
1. Insert the provided CD in the CD drive. Open a le list of the CD, then double-click “multiclient(xxxxxx).exe” to install the le.
CD Contents (typical)
2. Browse for the preferred destination location in the InstallSheild Wizard window, then click Next.