User manual

40
Icon Description
Sequence button. Click this button to use a sequence function.
Manual Record button. Click this button to begin recording.
Alarm-out function on/o button. When an alarm is in progress, click this button to stop reporting the alarm.
Click the split screen icon to change the current split screen mode.
Indicates that the lock is set.
Indicates that alarm is set. To set the alarm function, press the Alarm button on the front panel.
Indicates that the alarm output is activated.
Audio mute. To set audio mute, press the Audio button on the front panel.
Single audio channel. To set audio single channel for the selected channel only, press the Audio button on the front panel.
To mix audio channels, press the Audio button on the left side.
Event indicator. When there is an event (motion recording, video loss, HDD fail, S.M.A.R.T), this icon will be highlighted bright.
Indicates that a network client is connected to the DVR.
Indicates that sequencing mode is enabled.
The current date and time.
Remote control ID display. If a remote ID is not set, the message “A(all)” is displayed.
Displays the amount of recording space used on the hard disk from 0-99%.
Indicates that HDD is recycled (full and overwriting oldest data with new data).
Continuous recording in progress.
Manual recording in progress. To set Manual recording mode, press the Record button on the front panel.
Motion alarm recording in progress.
Sensor recording in progress.
SECTION 4: LIVE, SEARCH, AND PLAYBACK