User manual
26
SECTION 3: SYSTEM SETUP
Item Description
MOTION ZONE
Select either Full Zone or Partial Zone for motion sensing.
FULL ZONE: The motion sensor is active on the whole screen. Set the level of sensitivity for MOTION SENSITIVITY.
PARTIAL ZONE: Selecting Partial Zone for the channel, then clicking the submenu button, opens a widow containing the
camera image overlaid with a 22 x 15 block areas. You can select motion sensing for the blocks in the areas individually
by clicking on them, or you can select a larger area by dragging the mouse cursor across a rectangle of blocks. Block areas
selected for motion sensing are hashed green. To disable motion sensing on a selected block, click on it.
To return to the Device menu, right click on the screen, or press the ESC button on the front panel.
MOTION SENSITIVITY Set the motion sensitivity for the specied channel. (1 ~ 9).
PRIVACY ZONE Set the privacy zone for the specied channel. Privacy zones block a partial area of the video image from live viewing and
recording. You can set up to 4 privacy zones. To set privacy zones:
1. Click the PRIVACY submenu bar.
2. Press the left mouse button, then drag the mouse along the diagonal of a rectangular area you want to privatize. A gray
rectangle will be formed. Release the mouse button.
3. Right click the mouse to open the privacy menu, then click the region number you want to assign to the rectangle. The
rectangle will be set to the color related to the Region number.
4. Repeat these steps to mark up to 4 privacy zones. Click Quit to close the submenu.
To delete a zone, click on the zone you want to delete, Right-click to open the privacy zone submenu, then click Delete
this Region
.
KEY TONE Enable/disable tone when key is pressed.
REMOTE CONTROL ID Select an ID for the remote control device.
1. Select ID number.
2. On the remote control, press the same number as the ID set in the DVR.
3. An icon will be displayed on Live screen that corresponds to the remote control. (0 ~ 99)
SENSOR Select sensor number. (1 .. 4)
TYPE Set the type of sensor for the specied channel. Options: OFF, N/O (normal open sensors), N/C (normal closed sensors).
VIDEO INPUT TRIMMING When the resolution of input video is less than 960 x 480, such as 940 x 480, the right and left part in black can be trimmed.