User manual

21960H H.264 DVR User Manual
SECTION 3: SYSTEM SETUP
Open Submenu
Drag to adjust
Open Drop-down List
Table 7. DISPLAY menu options
Item Description
OSD
Enable/disable the on-screen display.
OSD CONTRAST Set the visibility level of the OSD. (0 ~ 100)
SEQUENCE Enable/disable sequential display of video in full screen mode.
SEQ-DWELL TIME Set the dwell time of each quad-split or 9-channel display in sequential display mode. (3 ~ 60 seconds)
CHANNEL In the channel submenu, you can tune the display settings for all cameras at once, or setup each camera individually. Click the
channel drop-down list to select the channel, then use the click the submenu buttons to NAME the channel and set the COVERT
property (enable/disable live display mode). Drag the marker on the image adjustment bars to perfect the image.
BRIGHTNESS: Change the brightness value of the selected channel. (0 ~ 100)
CONTRAST: Change the contrast value of the selected channel. (0 ~ 100)
HUE: Change the hue value of the selected channel. (0 ~ 100)
SATURATION: Change the saturation value of the selected channel. (0 ~ 100)
Click OK to save the settings and close the window.
VIDEO OUTPUT
(HDMI / VGA)
Allows user to set monitor output resolution from 720p 50Hz / 60Hz, 1080i 50Hz / 60Hz, 1080p 50Hz / 60Hz.
Click OK
.