User manual
116
SECTION 10: BLACKHAWK FOR MAC
Following is a 1-channel view captured from recorded video.
10.6 Search for and playback video
To search for and playback a video clip:
1. Connect to your DVR (see the procedures above). The Info frame will reect the DVR connect status.
2. Select the camera (channel) you want to play recorded video from.
3. Select the calendar date when the recording was made. In the Date & Time frame, the days when recordings were made
are highlighted in gray, and the date selected is colored blue.
4. Enter the hour, minute, and second of the recording in the elds below the calendar, if known. If the time is not entered,
playback will begin with the rst recording of the day of the camera selected.
5. Click the magnier icon to begin playback.
NOTE
BlackHawk for MAC cannot be used to backup video clips or create screen captures.