User manual

98
The MOTION ZONE parameter has two option: FULL ZONE (the entire camera image) and PARTIAL ZONE. If you select PARTIAL
ZONE, you can identify the areas (cells) of the image for each camera channel that should be monitored for motion detection. To
select an cell, click on it. Cells selected for motion sensing are marked in yellow. To deselect a cell, click on it again. This feature is
more ecient for the DVR to process. Selecting PARTIAL ZONE opens the following graphical display.
You can also set the motion sensitivity of the area(s) selected in the image.
SECTION 9: WEBVIEWER