Preface Preface Thank you for purchasing the Samsung 4‐channel DVR with a built‐in LCD monitor. This is a user instruction manual for the SVR‐470. The person who installs and operates the product shall be aware of this manual and other manuals referenced by this manual before installation and operation in order to use it properly. This manual and the software and hardware explained herein are protected by copyright law.
Digital Video Recorder SVR-470 This product must be installed by skilled and experienced personnel; self‐installation by the user is prohibited. Self‐installation by the user may result in fire, electrocution, and/or product malfunctions. Please contact your sales agent for help with safe assembly and installation. This instruction manual is based on the SVR‐470 installed with the firmware version at 1.0.0. The contents of this manual may change in order to accommodate updates in firmware and/or software.
Table of Contents Table of Contents CHAPTER 1. SAFETY WARNINGS ................................................................ 7 1.1. Warning Symbols .......................................................................................................... 7 CHAPTER 2. PRODUCT DESCRIPTION ...................................................... 11 2.1. Package Contents ....................................................................................................... 11 2.2. Front .................
Digital Video Recorder SVR-470 4.3. Menu Screen Description ........................................................................................... 26 4.4. Closing Menu .............................................................................................................. 27 CHAPTER 5. SYSTEM SETUP ..................................................................... 29 5.1. System ...............................................................................................................
Table of Contents 7.2.4. Simple POS Manual ............................................................................................. 49 7.2.5. Relay ..................................................................................................................... 52 CHAPTER 8. SCREEN SETUP ..................................................................... 53 8.1. Channel 1 ~ 4 ...............................................................................................................
Digital Video Recorder SVR-470 10.7.1. Still Image Copy Instructions ......................................................................... 61 10.7.2. Video Copy Instructions .................................................................................. 62 10.8. Playing Recorded Video ......................................................................................... 64 CHAPTER 11. USING WEB VIEWER ........................................................... 65 11.1.
1.1. Warning Symbols Chapter 1. Safety Warnings 1.1. Warning Symbols Misuse or wrongful operation of the item may result in death, injury, or bring about other harmful results. It indicates absolute caution must be observed when operating Warning said item. Before Installation 9 Please check the power outlet voltage (AC 100V~240V) before you connect the power to the outlet. 9 Make sure that the product is switched off before you install it.
Digital Video Recorder SVR-470 Disassembly and Cleaning 9 There is a risk of malfunction, shock, and other dangers. Do not disassemble or attempt to fix or alter the product yourself. 9 Do not clean the product with water, paint thinner, or other organic solvent as doing so may cause product malfunctions and/or electric shock. When cleaning the product, use a dry cloth to wipe the exterior of the device. Misuse or wrongful operation of the item may result in injury or damage to the item.
1.1. Warning Symbols FCC Compliance Statement NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Digital Video Recorder SVR-470 Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin's will to create environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
2.1. Package Contents Chapter 2. Product Description 2.1. Package Contents The SVR‐470 package includes the DVR and following components. Please make sure that your package is not missing any of these. If it is, please contact your vendor for assistance. 1. Network Viewer Program CD 2. User's Manual 3. Remote Controller 4. Remote Controller Batteries 5. Power Cord & Adapter 6.
Digital Video Recorder SVR-470 2.2. Front 7 8 9 10 6 4 5 3 2 1 2.2.1. Button Operation No. Button 1 POWER 2 ‐ 3 DIRECTION Description No. Button Description 11 PTZ Controls a connected PTZ camera. 12 COPY Backs up still images and videos. 13 AUTO Activates the screen Sequencing mode. Turns the DVR on or off. Moves between menus, or selects a menu. Reverses the playback direction when playing or searching a video. The playback is backwards when pressed while playing forward.
2.3. Back 2.2.2. LED Operation No. LED Description No. LED Description 1 POWER Turns on when the product is powered. 6 REC 2 COPY Turns on while a backup is in progress. 7 1 Turns on upon video input or the activation of an event. 3 ALARM Turns on when an alarm is activated. 8 2 Turns on upon video input or the activation of an event. 4 NETWORK Turns on when the system is connected to a network. 9 3 Turns on upon video input or the activation of an event.
Digital Video Recorder SVR-470 2.4. Remote Controller Buttons No. Terminal Description 1. MENU Opens the Settings menu. 2. AUTO Activates the Auto Sequencing mode. 3. SPOT Not used for this product. 4. PTZ 5. COPY 6. RECORD 7. STOP 8. SEARCH 9. STEP 10. PLAY/PAUSE 11. FAST Changes the playback speed to 2x and 4x while playing and searching video. 12 DIR Reverses the playback direction when playing or searching a video.
2.4. Remote Controller Buttons 17 ID SET Press the ID SET button and then the number button. The product displays ID=Number (1~9) on the screen and starts responding to the remote controller's commands. 18 POWER Turns the DVR on or off. Remote Controller Operation Range 30° 30° 5m Remote Control ID Setup To control multiple products with one remote controller, remote control IDs are assigned to each product.
Digital Video Recorder SVR-470 [How to Use] ③ To control a product with ID 1, press the ID SET button [Pic 1] and then the number 1. The product displays ID=1 on the screen [Pic 2] and starts responding to the remote controller's commands. ④ To control a product with ID 2, follow the same instructions as above; press ID SET, and then the number 2. The product then displays ID=2 on the screen and starts responding to the remote controller's commands. [Pic 1. Remote ID SET Button] [Pic 2.
3.1. Network Wiring Chapter 3. Installing Hardware 3.1. Network Wiring The following example is a wiring diagram for the SVR‐470, monitors, CCTVs, and external devices. [Installing the SVR-470] 3.2. Detailed Wiring Instructions 3.2.1. Camera The SVR‐470 can be connected to a maximum of 4 CCTV cameras. Connect the BNC terminal on a camera with the CAMERA IN terminal on the back of the product.
Digital Video Recorder SVR-470 3.2.2. Connecting Audio This product can record audio when audio devices are connected to the audio inputs. [The SVR-470 & Audio Device Connection] Audio Input Connect a RCA audio input terminal (mic‐equipped camera) with the AUDIO IN terminal on the back of the product. (Compatible with any mic and speaker model.) To activate audio input, turn [ON] the [Recording Audio] option at the Settings → Note Record Setup → Detail Setup menu.
3.2. Detailed Wiring Instructions [Connecting Monitor] VGA Monitor Output This output connector is for a VGA monitor. No. Description No. Description 1 Red Signal (75Ω, 0.7Vp‐p) 9 N/C (Not Connected) 2 Green Signal (75Ω, 0.7Vp‐p) 10 Grounded 3 Blue Signal (75Ω, 0.
Digital Video Recorder SVR-470 LCD Monitor Output You can use the 3.5" LCD monitor on this product for visual monitoring. To set up the LCD operation, go to the "System" mode under System Setup. The LCD performs identically to a BNC/VGA monitor. 3.2.4. Alarm Input & Output These external sensor connection terminals are used to receive information from connected sensors and devices. Relay Output This alarm output terminal is for a contact relay that sends alarm to an external device.
3.2. Detailed Wiring Instructions 3.2.5. External Control Device (RS–485) This terminal is used to connect an external control device. Term Switch on the back of this product turns on or off the terminating resistance of the RS‐485 communication device. 3.2.6. Connecting to LAN (Ethernet 10/100 Base–T) This port is used to connect to a network. No. Description No.
Digital Video Recorder SVR-470 3.3. Installing HDD Please follow the instructions below to add or replace an HDD. Assembling HDD Attach the HDD brackets to an HDD using the fixture screws. (No. 1: Screws, No. 2: HDD Brackets) Attach the 4 fixing screws and vibration reducing washers to the HDD bracket. The following picture shows an HDD attached with 4 fixture screws. Once the brackets are attached to the HDD, place the HDD on the product hanger.
3.3. Installing HDD Once the HDD is installed, connect the SATA and power cables. As shown in the picture below, connect the enclosed SATA cable to the HDD, followed by the HDD power then data cables to the board. [Connecting SATA Cable] [Connecting Power & Data Cables] ① HDD Data Cable Connector on the Board ② HDD Power Cable Connector on the Board After installing the HDD, fasten the HDD brackets as shown in the picture below. Now the HDD is fully attached to the product.
Digital Video Recorder SVR-470 [HDD Connection Diagram] HDD Connecting Instructions ① Place an HDD attached with the HDD brackets to the product hanger. ② Attach the HDD to the hanger using the enclosed fixture screws. ③ Connect the enclosed power/data cable to the HDD. ④ Connect the HDD data cable to the main board. ⑤ Connect the HDD power cable to the main board.
4.1. Monitoring Screen Chapter 4. Menu Introduction 4.1. Monitoring Screen When turning on the product, the front LCD monitor or a connected monitor displays a live screen. Before turning on the power, first connect a camera and monitor. Connect the power cable to the power jack on the back of the DVR, and then press the front power switch to turn on the DVR. Upon turning on the power, the DVR automatically detects available video input signals.
Digital Video Recorder SVR-470 Screen Settings Record Settings Event Settings Network System Settings System, HDD, Password, Time, PTZ Network, Client Access, Serial, E‐Mail Event, Motion Detection, Text, Relay Normal Settings, Detailed Settings Screen, Auto Sequencing, Screen Display 4.3. Menu Screen Description When pressing the MENU button on the main frame, or on the remote controller, the following menu screen appears.
4.4. Closing Menu while others will take effect immediately without delay. Menu Operation z Using the Main Frame Button Move between Menus: Press the Change Settings: Press the Exit Menu: Press ESC. buttons. buttons. z Using the Remote Controller Move between Menus: Press the Change Settings: Press the Exit Menu: Press ESC. buttons. buttons. 4.4. Closing Menu To exit the menu, press ESC. When a window appears asking your confirmation, select "YES" to apply new settings.
5.1. System Chapter 5. System Setup This chapter describes the general system menus of the DVR. Press the MENU button, and then select a tab using the left and right buttons. The sub menus appear as shown in the picture below. Press the ENTER button, and select a sub menu using the left and right buttons. Press ENTER again, and then change the settings of the menu by pressing the left and right buttons. 5.1.
Digital Video Recorder SVR-470 ⑦ TEST MODE: Select this mode to upgrade the firmware. For instructions on upgrading the firmware, please refer to (“Appendix: How to Upgrade Firmware.”) ⑧ LCD: Select a duration period to keep the front 3.5" LCD on for video display. The default value is 10 minutes. 3 MIN/10 MIN: If no button is used for 3minutes to 10 minutes, the LCD monitor automatically turns off, and then comes back up when any button is pressed. Always: Keeps the monitor on at all times. 5.
5.3. Password 5.3. Password Limit the usage of menus by setting a password. The DVR provides 1 ADMIN and 3 USER accounts. ① USER AUTHENTICATION: Set up the user permissions and password for the menus. The password must be a 4‐digit number, and can be selected with the number keys (0~9). ② USER PASSWORD: Enter a user password. `The password must be a 4‐digit number, and can be selected with the number keys 0~9. For more detailed instructions on setting up a password, please refer to DVR User Permissions.
Digital Video Recorder SVR-470 Total 6 different user permissions are available. List Description List Permissions to use menus. R/OFF PB Permissions to the Search option. P/OFF PTZ Permissions to use the PTZ options. P/ON MENU Description Permissions to use the Recording Off option. Permissions to use the Power Off option. Permissions to use the Power On option. z Pic A.: PASSWORD CHECK Description Enables a popup window that prompts for a password each time a menu is selected.
5.4. Clock 5.4. Clock Setup time‐related settings for a DVR such as the time, date display type etc. ① CLOCK: Configure the NTP and daylight saving time of the DVR. When the time is set, the system automatically reboots itself to save the previous data. DAYLIGHT SAVING: Select "ON" if Daylight Saving Time applies to your area. ‐ DST START: Select a date that Daylight Saving Time begins. ‐ DST END: Select a date that Daylight Saving Time ends. ‐ DATE SETUP: Select the current time of your area.
Digital Video Recorder SVR-470 resynchronizes its time to the server time. (Approximately 2 seconds of time difference occurs on a daily basis.) ‐ TIME SERVER: Enter the name of a desired NTP Server. (Korean Example: Enter an internet‐based NTP server such as time.bora.net.) ‐ GMT: Select your GMT time (adjustable). (Korea is GMT +09:00.) ② DATE MODE: You can change the display format of the DVR date.
6.1. Network Chapter 6. Network Setup 6.1. Network Set up information to connect a system to the network. ① NETWORK TYPE [ADSL, LAN, DHCP]: Select a network type to connect the system. LAN Settings IP ADDRESS: Enter the [IP address] for a system (generally provided by your ISP). SUBNET MASK: Enter the address of the sub net mask (generally provided by your ISP). GATEWAY: Enter the address of the [gateway] (generally provided by your ISP).
Digital Video Recorder SVR-470 6.2. DDNS Connection Setup Step 1). Set up the DDNS connection as follows at the Network Settings menu in the SVR‐470 main frame. Press the Menu button, and then select the Network menu. The following screen appears. On the following screen, change DDNS to "ON," and then press "ENTER" ① SERVER ADDRESS: Enter the address of the DDNS server. ② The default server is www.samsungipolis.com. () Caution: Do not change the server name unless it is necessary.
6.3. DDNS 6.3.1. DDNS Registration Step 1). Connect to the iPOLiS website and sign up for a membership. ¾ Website URL: [www.samsungipolis.com] ¾ To sign up, click to agree with the Terms of Service, check the availability of your ID, and then enter your personal information.
Digital Video Recorder SVR-470 Step 2). Using your registered ID, log in to the site. You can now register the DVR. Log in to the iPOLiS website. ¾ ¾ Upon login, a list of registered products is displayed. (If no product has been registered, the list shows an empty page.) To register the DVR, first register its product Domain. Check the availability of the product Domain, and then enter necessary information to finish the registration. ¾ Product Domain cannot be modified once they are registered.
6.3. DDNS Step 3). Set up the DDNS information for the SVR‐470. At the Network Settings menu in the SVR‐470 main frame, follow the instructions below. Press the Menu button, and then select the Network menu. The following screen appears. Select "ON" for DDNS. (The default address: www.samsungipolis.com) Enter the Domain and password used to register the product on the iPOLiS website into ID and PW. ¾ Once you finish the settings above, the DVR main frame is ready to connect to the DDNS server.
Digital Video Recorder SVR-470 Step 4). The connection status of the DVR is available to check at the Product List on the website. ¾ Connected products are displayed as "On" in the Product List. [View]: Moves to the login page of Web Viewer of the selected product. [Edit] / [Delete]: Edits the information of the selected products, or deletes the product from the list.
6.4. Connecting to Client 6.4. Connecting to Client ① PORT: Change a [port] to connect to a client. SVR‐470 uses a total of 4 ports. Default Port for DVR (3495): Connect, PTZ, Event, Video Data, Audio Data. Remote Storage Port (default + 1) : Network Backup. Remote Setup Port (default + 10) : Remote Setup. Web Connection Port (80) : Webpage Connect.
Digital Video Recorder SVR-470 6.5. SERIAL Configure settings to connect a POS device. ① TYPE: Select RS‐232 or RS‐485. ② SYSTEM ID: Select the system ID. ③ BAUD RATE: Select a data transfer speed (bits per second). ④ DATA BIT: Select a data transfer bit. ⑤ PARITY BIT: Select a type to check data transfer errors. ⑥ STOP BIT: Select a stop bit upon completing a data transfer.
6.6. E-MAIL 6.6. EMAIL Set up an email address to receive captured event images when events occur. ① E‐MAIL: Select to alert via email upon the occurrence of events. Selecting [ON] sends out an email, and [OFF] disables the email alert. ② MAIL ADDRESS: Enter the email address of the recipient. Press ENTER to bring up a soft keyboard and enter an email address. Use the up, down, left, and right buttons to select keys and enter an address. ③ MAIL SERVER IP: Enter the IP address of the outgoing mail server.
7.1. Record Setup Chapter 7. Recording & Event Setup 7.1. Record Setup Press the MENU button, and then select a tab using the left and right buttons. The Record sub menus appear as shown in the picture below. Press the ENTER button, and select a sub menu using the left and right buttons. Press ENTER again, and then change the settings of the menu by pressing the left and right buttons. 7.1.1. General Setup ① IMAGE SIZE: Select a video size. The SVR‐470 supports two resolutions: 352x240 and 704x480.
Digital Video Recorder SVR-470 CHANNEL: Select a channel to apply the detailed settings to. MODE: Select a recording mode for the selected channel. List Description Normal Recording Mode Commands the channel to keep recording 24 hours. Motion Detection Recording Commands the channel to start recording only if movement is detected. Sensor Commands the channel to start recording only if a sensor is activated. TEXT Commands the channel to start recording only if a text event occurs.
7.2. Event Setup S : Sensor Recording ‐ : Recording Disabled C : Continuous (Normal) Recording M : Motion Detection Recording T : Text Recording Image Quality: Select High, Standard, or Low to adjust the image quality. Recording Frames: Select the number of images (frames) that can be recorded per second. At the 704x480 size, a maximum of 30 images can be selected, and a maximum of 120 images at the 352x240 size. Pre‐Event Recording: Select to start recording prior to an event.
Digital Video Recorder SVR-470 screens do not display. Once the duration is over, the screen changes to the screen of an event that currently occurs in a different channel. ④ TEXT MONITORING: Select ON or OFF to display text information product name, price, quantity on the screen when using a POS. ⑤ SENSOR: Select a channel to set up a sensor. ⑥ SENSOR TYPE: Select a sensor option for a selected channel: N/O or N/C. N/O: Normal Open sensor N/C: Normal Close sensor OFF: Disabled 7.2.2.
7.2. Event Setup 7.2.3. Text Allows you to check the POS device data on the DVR video screen. To synchronize the protocol with the input device, select HEADER 1, 2, DELIMITER, and the number of lines to display on the screen. ① SYNC CHANNEL: Select a channel to display the POS text data. ② DEVICE NORMAL: Select when connecting to a barcode reader or other conventional POS device. FINGER 007: Select to connect a fingerprint recognition device.
Digital Video Recorder SVR-470 Output channel: Select a channel to display text data on the screen.POS data displays only in full screen not in quadruple screen mode. Device: Two devices are supported: Normal and Finger007. Normal does not indicate specific models or brands. Finger007 is a fingerprint recognition device. Protocol: ON/OFF. When setting Protocol to OFF, Header 1 and 2 and Delimiter are disabled.
7.2. Event Setup Kalatel Quick-Easy Mart 3197 Airport Loop Drive Costa Mesa, Ca. 92626 Candy Bar Soft Drink 64oz. Chips $1.49 $2.49 $0.99 --------------------------TOTAL $ 7.99 Then the data displays in the format above. Live Screen Text data does not appear in 4 split screens. The display channel must be changed to the full screen mode in order to display text data. Text data automatically disappears in 3 to 4 seconds. Playback Screen Text data does not appear in 4 split screens.
Digital Video Recorder SVR-470 7.2.5. Relay Select options to activate a relay. [The SVR-470 Relay Setup Screen] SENSOR (CH1, CH2, CH3, CH4) : Activate a relay when the sensor of a selected channel is activated. MD: Activate a relay when movement is detected. TEXT: Activate a relay when using POS. V‐LOSS: Activate a relay when video input signals are lost. ※ V‐LOSS: Available only if the Recording Mode is set to "Motion Detection" or "Sensor," and "Pre‐Event Recording" is selected.
8.1. Channel 1 ~ 4 Chapter 8. Screen Setup Press the MENU button, and then select a tab using the left and right buttons. The Live Screen Monitoring sub menus appear as shown in the picture below. Press the ENTER button, and select a sub menu using the left and right buttons. Press ENTER again, and then change the settings of the menu by pressing the left and right buttons. [The SVR-470 Screen Setup] 8.1.
Digital Video Recorder SVR-470 8.1.1. Multiple Channel & Split Screen Display When pressing a number key 1 to 4 on the DVR main frame, the corresponding channel displays in full screen. Pressing ENTER displays 4 channels in 4 split screens. 8.2. Auto Sequencing The Live Screen displays the video of channels in sequence, Channel 1 > Channel 2 > Channel 3 > Channel 4, at defined intervals. In the [Auto Sequence] menu, you can select a channel‐sequencing interval from 1 to 10 seconds.
8.3. Screen Display Status To cancel the sequencing mode, press the AUTO button again. 8.3. Screen Display Status Select the type of information to show on the Live Video screen. ALL: Select [ON] to display all status information on the screen. CLOCK DISPLAY: Select [ON] to display the current time on the screen. HDD FREE SPACE: Select [ON] to display remaining free space of the HDD.
Digital Video Recorder SVR-470 8.3.1. Recording Mode Display 1) Manual Recording Pressing the REC button starts recording manually as "R (Manual Recording)" displays on the upper right side of the monitoring screen. Pressing the REC button again activates the Recording mode of each channel.
9.1. CH1~CH4 Individual Channel Setup Chapter 9. PTZ Setup Press the MENU button, and then select a tab using the left and right buttons. The PTZ sub menus appear as shown in the picture below. Press the ENTER button, and select a sub menu using the left and right buttons. Press ENTER again, and then change the settings of the menu by pressing the left and right buttons. 9.1. CH1~CH4 Individual Channel Setup Setup the ID and model of a camera by channel. CHANNEL: Select a channel.
Digital Video Recorder SVR-470 9.2.1. Pan & Tilt Controls Press the ENTER button at the PAN/TILT menu. ‐ Tilt: Press the button to move the camera lens upward. Press the button to move the camera lens downward. ‐ Pan: Press the button to move the camera lens right. Press the button to move the camera lens left. 9.2.2. Zoom & Focus Controls ‐ Zoom: Press the ‐ Focus: Press the button to zoom in. Press the button to zoom out.
10.1. Searching Events Chapter 10. Searching Recorded Videos Pressing the SEARCH button brings up the following Search menu. You can search recorded videos by the time, event, and date, and also view the list of log and backup files. 10.1. Searching Events You can search events of each channel by the recording mode: Motion Detection, Sensor, Text, Normal, and Manual Recording modes. When pressing ENTER at the Event Search menu, the following screen appears.
Digital Video Recorder SVR-470 10.2. Time Bar Search For convenient searches, use the time search bar to select a search timeline. When pressing the ENTER button on a timeline, a calendar displays. Select a date on the calendar, and then press ENTER. The following screen appears. Hours with recorded videos are highlighted with a color bar. V1~V4: A green bar displays the hours of saved video. A1~A4: Displays if a channel has recorded audio.
10.5. Play from Last 10.5. Play from Last Press ENTER at the Play from Last menu to play videos from the very last one. The product may play an earlier video recorded maximum 1 minute prior to a last video depending on the characteristics of video file formats. 10.6. Searching Log Files Pressing ENTER at the Log menu displays a calendar. When selecting a date on the calendar, the log files of the DVR list as shown in the picture below. To exit the screen, press ESC. 10.7.
Digital Video Recorder SVR-470 Pic 1. [Select COPY ‐> "YES"] Pic 2.[Image Successfully Saved in USB Memory Stick] Pic 3.[Select SEARCH ‐> Copy List] Pic 4.[Image Successfully Saved in USB Memory Stick] 10.7.2. Video Copy Instructions Videos can be copied only while being played from the Search menu. ① While playing a saved video, press PAUSE at a frame that you want to start copying from. Then press COPY. I. The video is firstly saved to the internal file list of the DVR.
10.7. Copying Files Pic 1[Select VIDEO] Pic 2.[Select Video Copy Duration] Pic 3.[Select Copy Format] Pic 4.[Select YES to Save to USB Memory Stick] Pic 5. [Copy list] ④ AVI: When saved in AVI format, files can be played in Windows Media Player or other video players. ⑤ DVR: When saved in the DVR format, files cannot be played on popular media players but only on an exclusive player that is automatically created inside the USB storage device along with a video file.
Digital Video Recorder SVR-470 10.8. Playing Recorded Video Button Function Manual recording button. Searches a video by one second. Plays or pauses a video. Stops a video. Increases the playback speed of a video for searching. Changes the playback direction of a video for searching. (Play forward/backward) Certain videos may skip a few frames during playback, but this does not indicate a Caution problem in the product.
11.1. Connecting to Web Viewer Chapter 11. Using Web Viewer 11.1. Connecting to Web Viewer The SVR‐470 provides a self‐contained Web Viewer. You can monitor and play video using the viewer without installing an extra browser. For instructions on the network configuration and DDNS registration, please refer to Chapter 6. Both a network and DDNS registration are required in order to connect to the Web Viewer.
Digital Video Recorder SVR-470 11.2. Web Viewer Login Page Enter an address in the address bar, and then press "Enter". The following Web Viewer Login page appears. Category Description IP ADDRESS Enter a product IP address or domain name that is registered to DDNS (www.samsungipolis.com) PORT Enter the "port" of the product. (Default Port: 3495) USER ID Enter your USER ID. (Default ID : ADMIN, USER1, USER2, USER3) Set ‐> product's MENU > SYSTEM SETUP > USER ID PASSWORD Enter your USER ID.
11.3. Live Mode 11.3. Live Mode 4 users can be accessed by webviewer at the same time, and 2 users can be Note connected by using SVM‐S1 program. Live Screen Buttons Button Description Splits the screen for multi‐channel monitoring; the SVR‐470 supports 1 and 4 split screens. Displays a selected channel in the Full Screen. Pauses a live video. (Used to capture a still image.) Clicking this button again replays the video. Captures still images of a screen. Camera Pan & Tilt control button.
Digital Video Recorder SVR-470 11.4. Search Mode Button Description Switches to Search mode. Search and play the video of a channel that is selected in Search mode. Displays days with saved videos; clicking on a date displays a timeline with saved videos per channel. Select a search time to play a video immediately. Turns on the audio for playing video. Captures still images of a screen. Use this option to save video while playing.
11.5. Web Viewer Buttons 11.5. Web Viewer Buttons 1) Live Mode 1 Channel/4 Channels supported. Not used for this product. Displays a channel in full screen mode. Captures still images of a screen. Pause Camera Pan/Tilt Control Button When selecting “ZF”. Camera Zoom/Focus Control Button Audio Button ※ Buttons Related to Camera OSD Controls: "Zoom/Focus" Button Description Button Commands the camera to zoom in. Commands the camera to zoom out.
Digital Video Recorder SVR-470 2) Search Mode Switch to Live Mode Saved Data Display Calendar Search Time Selection Icon Captures still images of a screen.
Appendix A) Troubleshooting Appendix Appendix A) Troubleshooting 1. Cannot turn on DVR ‐ Check power ‐ Check the power cord 2. Monitor displays black screen ‐ Check the monitor power ‐ Check the connection between the monitor and DVR ‐ Check the monitor cable port ‐ Check the DVR power If the screen displays in only black and white, check the camera type (NTSC/PAL) and then reboot 3.
Digital Video Recorder SVR-470 ‐ Check the DVR IP ‐ Check the PC IP ‐ Run a ping test ‐ If Web Viewer fails to show video on a PC, check the PC's technical specifications 10. LCD shows black screen ‐ Check the power adapter ‐ If the power adapter functions properly, check the Video Output signal on the back of the product ‐ If the Video Output signal functions properly, check the internal cable connection ‐ If the problem persists, contact your vender for assistance 11.
Appendix B) How to Upgrade Firmware Appendix B) How to Upgrade Firmware To improve the product performance in the software aspect, you may upgrade the firmware. To upgrade the firmware, prepare a USB memory stick and follow the instructions below. ① At the System menu under System Setup, select "TEST MODE," and then press ENTER. ② The DVR reboots itself, and then enters the DVR DIAGNOSTICS MENU automatically, displaying the screen below.
Digital Video Recorder SVR-470 Appendix C) How to Resolve Time Difference Errors When the DVR time is changed or a time difference occurs, the following message may appear. It appears if the time of the DVR is set to older than the recorded time of videos in the HDD. To resolve this error, set up the DVR time correctly. ① When the message appears, unplug the power cable. While holding down the ESC button, turn on the DVR by plugging the power cable back. (Hold down ESC until the screen displays.
Appendix D) Factory Default Values the HDD, overlapped data may be deleted. Be cautious when setting up the date and time. ⑥ Once the time is set up, move the cursor over BOOT APPLICATION, and then press ENT. The DVR reboots and enters normal monitoring mode. Caution When upgrading the firmware, the DVR may not be able to detect a USB stick depending on the manufacturer. If that happens, please use one of the recommended USB devices as listed below. San Disk, Pretec, LG, Innotech C&C, or Transcend.
Digital Video Recorder SVR-470 Record Setup Main Menu General Setup Detail Setup Sub Menu Resolution Repeat Record HDD Warning Message HDD Warning Beep 352x240 On 1% Off Channel Record Mode Schedule Image Quality Frame Rate Pre Event Duration Post Event Duration Audio Channel 1 Continuous >> High 15f/s 3 sec 5 sec Off Event Setup Main Menu Default Value/State Sub Menu Default Value/State Event Event Beep Event Screen Mode Event Duration Text Sensor Sensor Type Off Off 5 sec.
Appendix D) Factory Default Values Main Menu E‐Mail Sub Menu E‐Mail Mail Address Mail Server IP Authentication ID PW Return Mail Address Default Value/State Off Settings Settings Settings >> >> >> System Setup Main Menu System HDD Password Clock PTZ Sub Menu Default Value/State Language Key Buzzer Default Remote Setup Remote Controller ID Description Test Mode LCD English Off >> On 0 Display >> 10 minutes HDD Format HDD Description Apply Display User Authentication User Password Event Bee
Digital Video Recorder SVR-470 Appendix E) Compatible PTZ Camera Models Company SAMSUNG TECHWIN PELCO DONGYANG Model Samsung SPD Samsung SRX‐100B PELCO(P), PELCO(D), CM6700 DSC‐230S/230M/240, DCP‐100, DRX‐500/502A, DY‐255 VICON VPS1300, V2311RB3, 422R CANON Canon VC‐C4 ELMO PANASONIC PTC‐200 WV‐CS850 CNB PTZ102N SONY EVI‐D30, VC‐C50I Samsung Electronics HONEYWELL AD MRX‐1000, MPT230, SCC641 HRX‐700 AD Speed Dome WON WOO WON WOO DYNACOLOR DSCP COSTAR COSTAR 2500 KALATEL KTD‐312 SENSORM
Appendix F) Recommended HDD Models Appendix F) Recommended HDD Models Company Model Size RPM BUFFER Reconi‐ tion Record Playback ST310003405V (Surveillance) 1TB 7200RPM 16MB OK OK OK ST3250410AS (Barracuda) 500GB 7200RPM 8MB OK OK OK ST3250310SV (Surveillance) 250GB 7200RPM 16MB OK OK OK ST3160815AS (Barracuda) 160GB 7200RPM 8MB OK OK OK HDS721010KLA330 1TB 7200RPM 32MB OK OK OK HDP725050GLA360 500GB 7200RPM 16MB OK OK OK WD5000AVVS 500GB 7200RPM 16MB O
Digital Video Recorder SVR-470 Appendix G) Product Specifications Category SVR-470 Display Video Live Inputs Resolution Frame rate Resolution Multi Screen display 4 composite video 0.5–2 Vpp, 75 ohm automatic termination 704x480 NTSC, 704x576 PAL 120fps NTSC, 100fps PAL 704x480 NTSC, 704x576 PAL 1/4 Compression Mode Overwrite modes Pre‐alarm Post‐Alarm H.264 Up to 30fps @ 704x480 Up to 120fps @ 352x240 Up to 25fps @ 704x576 Up to 100fps @ 352x288 Manual, Schedule, Event Continuous Up to 3 sec.
Appendix G) Product Specifications Alarm Connections Communication Protocols Inputs Outputs Remote notification Ethernet Serial interface PTZ control interface PTZ Keyboard USB eSATA Application Support Terminal 4 inputs, NO/NC Terminal 1 outputs Notification via e‐mail RJ45 10/100 Base‐T RS232C RS485 RS485, Max. signal voltage +/‐12V 1 USB 2.
Digital Video Recorder SVR-470 Appendix H) Product Schematics 82
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com www.samsungipolis.com SAMSUNG TECHWIN EUROPE LTD.
