User`s manual

Note:

z You can connect the HDD data cable and the power cable first and then fix the HDD in the

device.

z Please pay attention to the front cover. It adopts the vertical sliding design. You need to

push the clip first and then put down.

 )URQW3DQHO

The front panel is shown as in Figure 1.

Figure 1

Please refer to the following sheet for detailed information.

Name Icon Function

Power button

Power button, press this button for three seconds to boot up

or shut down DVR.

Up/

Down

SǃT

Activate current control, modify setup, and then move up

and down.

4. Turn the device upside down

and then turn the screws in

firml

5. Fix the HDD firmly.

6. Connect the HDD cable and

power cable.

7. Put the cover in accordance

with the clip and then place the

upper cover back.

8. Secure the screws in the

rear panel and the side panel.