Specifications

Hard Disk Drive Tray – GB Seagate Drive (ST31200)
12/01 Application ModuleX Service 79
Honeywell
1.2 GB Seagate
drive address
pinning
The pinning to define the device address on the SCSI interface bus must
be done. The drive on the right of the tray is always pinned for address 6
and the optional drive on the left is always pinned for address 5.
The following diagram illustrates the pinning for address 6. Notice that
the drive is shown upside down.
40034
123456
PWB
Drive
Bottom
2
0
2
2
2
1
No
Jumpers
Address 6
Shown
Drive address 5
The diagram below illustrates the same drive pinned for address 5.
40035
123456
PWB
Drive
Bottom
2
0
2
2
2
1
No
Jumpers
Address 5
Shown