Specifications

Hard Disk Drive Tray – Drive Tray Description
64 Application ModuleX Service 12/01
Honeywell
If the primary drive is replaced by a drive that was the second drive on
another system, the appropriate recovery procedure must be used to boot
operating software from an alternate boot source such as a DAT drive.
This DAT drive may be locally connected or accessible over the
network. A complete software restore is required to get the coprocessor
file structure to reflect conditions existing prior to drive replacement.
If the optional second drive is replaced with a drive containing files from
another system, the existing files must be discarded by initializing the
drive and then performing a software restore operation from customer
generated DAT drive “Backup Tape” (or other available source) before
returning the replaced drive under system control using the “mount”
command.