Specifications

Hard Disk Drive Tray – Drive Tray Description
60 Application ModuleX Service 12/01
Honeywell
Disk drive
physical
placement and
connections
The diagram below shows the drive tray from the opposite end when
compared to the diagram above. Notice the following:
• Physical position of each drive
• Drive tray internal circuit board
• SCSI interface ribbon cable for each drive
Disk drives currently originate from several different manufacturing
sources. Their drive mounting and electrical connection properties are
identical.
Each available disk drive is described later in this section.
Hard disk drive
tray (rear view)
This is a view of the hard disk drive tray from the rear side of the board.
Notice the SCSI interface cables. The SCSI interface originates at the
free edge of the coprocessor board on the WSI2 assembly.
51171
SCSI Interface
from Coprocessor
Optional 2nd Drive
(Address 5)
Primary Drive
(Address 6)
Circuit Board
SCSI Interface Cables