Specifications

Application ModuleX – Board Slot Definition
14 Application ModuleX Service 12/01
Honeywell
Table 2-2 Five-Slot Chassis Board Locations (with 256 MB Coprocessor Memory)
Slot Front Rear
5HardDiskDriveTray
(occupies two slots)
4 HDDT I/O
3 (Space for extra WSI2 Memory)
WSI2 *
2 WSI2 I/O
1 K2LCN-8
or
K4LCN-8 ( or -16)
CLCN A/B
or
LCN I/O **
* Two versions of the WSI2 board are available to provide the 64 MHz and 100
MHz coprocessors.
** Non-CE Compliant versions use the LCN I/O.
Ten-slot board
placement
The following two tables show the A
X
M board placement for the 10-slot
chassis using the HMPU node processor. Two versions of board
placement are used depending on the size of the coprocessor memory
which is located on the WSI2 board. The 256 megabyte size requires
additional space above the WSI2 board.
Slots 7 through 10 do not share a common backplane for interconnection
with slots 1 through 6.
The Hard Drive Disk tray does not depend on the backplane for signal
interconnection with other slots. It only uses the slots it occupies to
obtain power, which is common to all slots.