Specifications

HP 712/60 PA RISC Desktop Workstation – HP 712/60 Workstation in AXM Environment
114 Application ModuleX Service 12/01
Honeywell
HP 712/60
workstation
connection
The following diagram illustrates the connections required to provide all
of the A
X
M support functionality as described earlier in this section.
40068
WSI2 I/O
Coprocessor
WSI2
J6J1
CD-ROM
Drive
HP 712/60
Workstation
DAT
Drive
*
Media Access Unit
(51191782-100)
Coprocessor Console Connection
51191783-100A
Media Access Unit
(51191782-100)
Plant Information Network
(Ethernet Cable)
RS-232
Connector
LAN/AUI
Connector
The Ethernet Cable must be
terminated at these points if
only a workstation and A M
exist on the PIN.
X
*
51191783-100A
*
Coprocessor
console interface
cable
The cable required to make the coprocessor console connection between
the HP712/60 workstation and the A
X
M is an RS-232 direct connect
cable. It is provided with the A
X
M. See the Coprocessor Console
Terminal section of this manual for the part number and additional
details, if required. Reference:6.3 Coprocessor Console Terminal
Connection, page 88.
HP712/60
workstation
documentation
The HP 712/60 PA RISC workstation is a standard product of the
Hewlett Packard company. The supporting documentation is provided
with the product as it ships from their factory.
HP 712/60
workstation
technical support
Technical support services for this product are handled through the
Honeywell Technical Assistance Center (TAC). The toll free number
within the United States is [phone]. For calls within Arizona, the
number is [phone].
HP 712/60
workstation spare
parts
Repair services and spare parts for the HP 712/60 workstation are
supplied through the Honeywell Field Service Organization.