Specifications

TAC Access to Coprocessor – Communications Modem Description and Configuration
108 Application ModuleX Service 12/01
Honeywell
Modem
configuration
registers
The internal configuration registers of the U.S. Robotics Sportster 9600
modem must be properly loaded to finish the modem configuration task.
This is done by connecting a terminal to the modem and then entering
the required configuration data into the registers.
The configuration data for the U.S. Robotics 9600 modem is provided in
a table following in this section.
Once the registers are configured, the modem registers will retain the
information. This information is retained even if power is turned off and
on again.
Terminal
requirements for
setting modem
configuration
registers
The terminal used for setting the internal configuration registers of the
U.S. Robotics 9600 modem must have the following configuration
characteristics:
• Asynchronous operation
• 9600 baud rate
• 8 bits/no parity character format