Specifications

Coprocessor Console – Coprocessor Console Terminal Connection
12/01 Application ModuleX Service 101
Honeywell
Coprocessor
console terminal
interface cable
schematic
Examples of the direct connect terminal interface cable wiring details are
shown in the following diagrams.
Notice that two cable types are described. One is a 9 to 25 pin direct
connect cable and the other is a 9 to 9 pin direct connect cable.
The 9 to 25 pin cable (in the first diagram ) is available from Honeywell
logistics using the part number 51196218-300. This is an optional cable
type. It is not supplied with the A
X
M.
The 9 to 9 pin cable (in the second diagram) is available from Honeywell
logistics using the part number MP-XLLPLK. It is the cable type
provided with the A
X
M.9to25pincable
40041
Frame Ground
Transmitted Data
Received Data
Request to Send
Clear to Send
Data Set Ready
Signal Ground
Data Carrier Detect
Data Terminal Ready
Transmitted Data
Received Data
Ground
D-9 Female D-25 Male
U S Connector
Terminal
Connector
Notes:
1. Dashed connections may or may not be required by
your terminal.
2. Connections on pins 2 and 3 may need to be reversed
at one end and/or the D-25 may need to be a female
connector, depending on the characteristics of your
terminal.
(WSI2 I/O J1)
X
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
20