Technical data

12
3. EISA Cards
To remove and replace any of EISA cards, perform the following:
A. To remove an EISA card from your Series 700 system refer to your Series 700 Owners Guide.
B. To install an EISA card in your B–Class workstation see Figure 7, and refer to the Model
B132L/B160L Owner’s Guide (A4190–90014).
NOTICE:The X.25 link and the 10/100VG LAN Link require HP–UX 10.20 drivers to be
installed.
4. Graphics Cards
To remove and replace any of the graphic cards, perform the following:
A. To remove a graphic card from your Series 700 system refer to your Series 700 Owners Guide.
B. To install a graphic card in your B–Class workstation see Figure 7, and refer to the Model
B132L/B160L Owner’s Guide (A4190–90014).
NOTICE: The HCRX–8Z and HCRX–24Z are NOT supported without the A4242A Ac-
celerator. You must order the A4443A Accelerator kit, remove and send back
the A4072A accelerator card. Install the new A4242A accelerator card you
received in the A4443A accelerator kit.
Figure 7. Installing Option Cards in Your B–Class Workstation