Specifications

Coprocessor Console
6.2 Coprocessor Terminal Description and Configuration
3/96 Application Module
X
Service 83
Honeywell Inc.
6.2 Coprocessor Terminal Description and Configuration
Recommended
terminal
Honeywell recommends the Digital Equipment Corporation (DEC) VT-
100 terminal (or any simple terminal with equivalent functionality) for use
as a “console” terminal connected to the coprocessor. This terminal is
needed for initial configuration of PIN connected A
X
Ms and for
troubleshooting coprocessor related problems.
A U
X
S or System Administration and Development workstation
(HP 712/60) can be used as a coprocessor console. The serial port of these
devices must be connected to the serial port of the A
X
M coprocessor using
the provided terminal cable to support this functionality.
You may also use a PC running suitable terminal emulation software (such
as Microsoft Windows Terminal) to provide compatible terminal
functionality.
Required terminal
options
The terminal options must be set to provide the following functionality to
successfully communicate with the coprocessor serial port 1:
• Asynchronous operation
• 9600 bits per second
• 8 bits/character
• No parity