Specifications

82 Application Module
X
Service 3/96
Honeywell Inc.
Coprocessor Console
6.1 Overview
Overview of
activities to be
performed
There are several distinct tasks required to connect a console terminal to
the coprocessor as a console.
• Select the proper terminal options.
• Connect the terminal to the WSI2 I/O board.
• The coprocessor software defaults to the proper configuration of Serial
Port 1 and no coprocessor configuration actions are required.
• Apply power to the terminal.
• Ensure the terminal emulation software is activated (if using a personal
computer or HP 712/60 PA-RISC workstation or U
X
S) to perform the
coprocessor console operations through serial port 1 of the A
X
M
coprocessor.
• Initiate communications using the keyboard on the terminal.
The usage of this console terminal is defined in the procedures provided in
the
A
X
M System Administration and A
X
M Troubleshooting manuals.
An illustration of a coprocessor console connection is shown below.
40040
WSI2 I/O
Coprocessor
WSI2
Terminal
Interface
Cable
VT-100
Compatible
Terminal
OR
HP 712/60
Work Station
Personal
Computer
U S
X
J1
RS-232
Port
Serial
Port
RS-232
Port
Serial
Port