Specifications

44 Application Module
X
Service 3/96
Honeywell Inc.
Hardware Description of Coprocessor
4.5 WSI2 I/O Board replacement
4 Insert the replacement board and secure the screws.
(Extraction/insertion levers exist in place of screws
on non-CE compliant units.)
5 Reconnect the cables removed in step 2.
6 The node is ready for power on and loading. Turn on
the power switch located on the A
X
M node power
supply.
7 Perform the node loading procedure. Reference the
Application Module
X
System Administration manual
for the detailed procedure, if required.
Table 4-4 WSI2 I/O Board Replacement Procedure (continued)
Step Action