Specifications
Hardware Description of Coprocessor
4.4 WSI2 Board Replacement
3/96 Application Module
X
Service 41
Honeywell Inc.
5 Ensure that the replacement WSI2 assembly has the
proper size coprocessor memory (complement of
board/s) properly mounted on the coprocessor board.
These boards are plugged into sockets on the
coprocessor board and then fastened with two
screws each.
Remember that the WSI2 and coprocessor memory
are ordered separately.
6 Insert the replacement WSI2 assembly using the
extraction/insertion levers.
7 Reconnect the cables removed in step 2. (SCSI and
PIN interface cables).
8 The node is ready for power on and loading. Turn on
the power switch located on the A
X
M node power
supply.
9 Perform the node loading procedures. Reference: >>
A
X
M System Administration
manual (Section 3).
10 The following steps (11 –14) are not required if your
coprocessor system does not use licensed software
options.
11 Obtain a temporary Honeywell license file by calling
the Honeywell Technical Assistance Center (TAC),
using telephone number 1-800-822-7673.
Inform them that you have changed your Application
Module
X
coprocessor hardware. You will receive
instructions on exactly what changes to make to you
license file. The change allows licensed options to
execute and has an expiration date.
Before the expiration date, a permanent Honeywell
license key must be obtained. Reference >>
Licensing Installation and Administration A
X
M,
Section 4 - Installing the License File
12 The new coprocessor hardware identification number
(unique to each coprocessor board) must be
obtained to start the process of replacing your Kinet
software license key.
The new coprocessor hardware identification number
is obtained by performing the following steps:
• Sign on as a user using a network connected
station or the coprocessor console terminal.
• Enter the command “/etc/lanscan”.
The 12 characters after “0x” under Station
Address is the new coprocessor hardware
identification number.
Table 4-3 WSI2 Board Replacement Procedure (continued)
Step Action