Specifications

124 Application Module
X
Service 3/96
Honeywell Inc.
Spare Parts
11.7 DAT Tape and Associated Parts
11.7 DAT Tape and Associated Parts
Introduction
DAT drive in
ergonomic
furniture station
The following table provides the part numbers for the optional DAT tape
drive and its associated parts when it is installed in the ergonomic style
console furniture.
ATTENTION
The DAT drive may be mounted in one of three (3) possible cabinet configurations. They are:
• Ergonomic furniture Station
• Classic furniture Station
• Table-top work surface (adjacent to Station containing the A
X
M node)
There are part differences associated with these configurations. Separate parts lists for each possible
cabinet arrangement are provided. Be certain you are using the appropriate parts list when ordering
parts.
Table 11-8 DAT Drive and associated spare parts
Assembly Number Description
51196257-100 Digital Audio Tape (DAT) drive--2 GB
51196257-200 Head cleaning cassette
51191814-100 Scratch tape media (4mm/2GB)
51192054-101 DAT/CD-ROM SCSI interface cable [runs between the
HDDT I/O board and ESD shield (feedthrough) into drive
enclosure]
51305070-200 DAT/CD-ROM SCSI interface cable [runs between the
ESD shield (feedthrough) into drive enclosure] and the
device inside
51305070-100 DAT/CD-ROM SCSI interface cable (Replaces
51305070-200 above if a Cartridge drive is also installed
in the same drive enclosure.)
51308080-200 Device DC power cable
51304769-100 Device DC power cable (Replaces
51308080-200 above if a cartridge drive is also installed
in the same drive enclosure.)
51192107-300 Ferrite ESD shield (feedthrough connector assembly of
drive enclosure)
See cartridge drive option in US or
U
X
S Service manual.
Peripheral Power Supply