Specifications

DAT DRIVE
9.3 DAT Drive Physical Configuration and Cabling
3/96 Application Module
X
Service 105
Honeywell Inc.
DAT drive cabling
The optional DAT drive connection may coexist with an optional CD-
ROM drive connection to the coprocessor.
The possible SCSI interface cable connection schemes are illustrated in the
following two diagrams.
The device connected to the far end of the cable (multidrop) must be the
device that provides the SCSI interface termination.
DAT connection
(no CD-ROM)
The following diagram illustrates the SCSI cable connection for an
optional A
X
M connected DAT drive without an optional A
X
M connected
CD-ROM. Notice that the optional A
X
M connected DAT drive shares the
common Universal Station drive enclosure. The cartridge drive shown
would be connected to the US node in the common station furniture.
40168
Hard Disk Drive Tray
(Located above WSI2 Board)
Backplane
Connection
HDDT I/O
WSI2 I/O
Coprocessor
HDDT
WSI2
HDDT Circuit Board
First Hard Disk Drive
Second Hard Disk Drive (Optional)
SCSI Cable 51304918-100
SCSI Cable
51192054-100
SCSI Cable
51305070-103
Cart
DAT
SCSI Cable
51305070-202
Drive Enclosure