Specifications

104 Application Module
X
Service 3/96
Honeywell Inc.
DAT DRIVE
9.3 DAT Drive Physical Configuration and Cabling
DAT option
switches
Internal DAT drive options are selected by 8 switches located on the
bottom of the drive. The connection of the DAT drive to the A
X
M requires
that these switches all be placed in the ON position. See the following
diagram.
These switches must be checked, and turned on if necessary, when
installing a DAT drive as a new option or a replacement drive.
40050
Option Switches Located
on Bottom
ON
12345678
(All Switches On)
Terminators
(Plugged in Behind Ribbon Connector)
PWR
SCSI 2 SCSI 1 SCSI 0
NC
Power Harness
to 5-Slot
Backplane (J9)
51304836-100
Terminator
Power Jumper
51196257-100
51304837-100
Jumper
Sets
Address=1
TERM