Specifications

102 Application Module
X
Service 3/96
Honeywell Inc.
DAT DRIVE
9.3 DAT Drive Physical Configuration and Cabling
9.3 DAT Drive Physical Configuration and Cabling
DAT SCSI address
pinning
The SCSI address for the DAT drive must be pinned for an address of 1.
The pinning is done in binary fashion as shown at the bottom right of the
following diagram.
This SCSI address pinning must be checked, and corrected if necessary,
when installing a DAT drive as a new option or a replacement drive.
40050
Option Switches Located
on Bottom
ON
12345678
(All Switches On)
Terminators
(Plugged in Behind Ribbon Connector)
PWR
SCSI 2 SCSI 1 SCSI 0
NC
Power Harness
to 5-Slot
Backplane (J9)
51304836-100
Terminator
Power Jumper
51196257-100
51304837-100
Jumper
Sets
Address=1
TERM