Specifications

DAT DRIVE

9.2 Preventive Maintenance

3/96 Application Module

Service 101

Honeywell Inc.

9.2 Preventive Maintenance

DAT head cleaning

The DAT drive heads require cleaning:

• after every 28 hours of actual operation.

• when the “Caution” indicator status on front of the drive is displayed.

See the table above for details.

Head cleaning

procedure

The following table provides the procedure for using the DAT cleaning

cassette. This cassette is available from Honeywell logistics under the

number 51196257-200 (HP 92283K).

Table 9-2 DAT Drive Head Cleaning Procedure

Step Action

Insert the cleaning cassette into the drive.

The drive will automatically load the cassette and

clean the heads.

The drive will automatically eject the cassette when

the cleaning cycle is complete.

Update the usage count on the label of the cleaning

cassette.

Discard the cleaning cassette after 28 uses; it is worn

out at that point.