Specifications

100 Application Module
X
Service 3/96
Honeywell Inc.
DAT DRIVE
9.1 DAT Drive Indicators
9.1 DAT Drive Indicators
DAT indicator
definition
The DAT drive front panel has two bicolored indicators (left and right).
The two colors are green and amber. Green is used to indicate normal
conditions, whereas amber is used to indicate that operator intervention is
required or that an error has occurred. The table below identifies the
possible indicator patterns and the associated definitions.
Table 9-1 DAT Drive Indicator Definitions
State Left Right Definition
Read/Write Green Blinking Green Blinking Cassette (Un)Loading
Green On Green On Cassette Loaded/
Online
Green On Green Blinking Cassette Loaded/
Activity
Green On Off Cassette Loaded/
OffLine
Write-Protect Amber Blinking Green On Cassette (Un)Loading
Amber On Green On Cassette Loaded/
Online
Amber On Green
Blinking
Cassette Loaded/
Activity
Amber On Off Cassette Loaded/
OffLine
Error Green On Green/Amber
Blinking
Media Wear (Caution -
dirty head, bad tape,
or worn head)
Amber On Amber On High Humidity or No
termination on SCSI
Interface
Amber Blinking Amber Blinking Cassette Loaded/
Activity
Amber Blinking Amber On Self-Test (failure)