Specifications

3/96 Application Module
X
Service 1
Honeywell Inc.
Application Module
X
Service Manual
Section 1—Introduction
1.1 About
this
Document
Basics
Product
description
The Application Module
X
is an LCN node that combines the Application
Module (AM) functionality with an HP-UX-based coprocessor.
CE compliant
hardware
Any equipment designated as "CE Compliant" complies with the European
Union EMC and Health and Safety Directives. All equipment shipping
into European Union countries after January 1, 1996 require this type of
compliance—denoted by the "CE Mark".
Purpose
This manual provides instructions for
maintenance and repair of the
Application Module
X.
Intended
audience
All personnel that are expected to
perform hardware installation,
troubleshooting, and repair activities on
the Application Module
X
.
For product
release
This publication supports TDC 3000X
software release 431 and CE Compliant
hardware.