Technical data

44 PowerPC Open Firmware Quick Start Guide
Edit the ConÞguration Variables
Using the keyboard or mouse:
1. Select the Edit the Configuration Variables option.
The NVRAM variables are presented one-at-a-time, similar to
this example:
Press <ENTER> to use the existing value.
Type =<ENTER> to use the default value.
Type .<ENTER> to exit and save changes.
Variable Name Current Value Default Value
mot-oem-logo? true true
24-hour-time? false false
concurrent-mode? false false
concurrent-device com1 com1
debug-device screen screen
menu? false true
New Value:
The responses are:
Press <ENTER> to accept the existing NVRAM variable
Press = <ENTER> to set the NVRAM variable to the default
value
Press . <ENTER> to exit, save, and return to the menu
Type newvalue <ENTER> to replace the existing NVRAM
value
2. To return to the previous menu at any time:
Press q <ENTER> to exit
All changes are dynamic and immediately saved to NVRAM.
You may rerun this option or reset the default values if you
want to restore a variable that was accidentally modified.