Technical data

34 PowerPC Open Firmware Quick Start Guide
A display similar to the one below appears:
Total Tests Run: 18
Total Passed: 18
Total Failed: 0
2. Press <ESC> or click the right mouse button to return to the
previous menu.
Display the Diagnostic Output Buffer
This display is a cumulative log of ALL tests which have been run
since the last reset/power-up.
For example, if the Run the Full Diagnostics option has been run
twice since the last rest or power-up, then two sets of test results are
included in the diagnostics buffer.
If no diagnostics have been run since the last reset or power-up,
then a dialog box displays the following message:
The diagnostic output buffer is empty.
To view the test results, use the keyboard or mouse to:
1. Select Display the Diagnostic Output Buffer from the
Firmware Diagnostics menu.
A screen similar to this one is displayed:
Testing /memory@0
Testing /pci/scsi@c
Testing /pci/viper@12
Testing /pci/isa@b/floppy@i3f0
Testing /pci/isa@b/lpt@i3bc
Testing /pci/isa@b/com@i2f8
Testing /pci/isa@b/com@i3f8
Testing /pci/isa@b/nvram@i74
Testing /pci/isa@b/rtc@i74
2. Press <ESC> or click the right mouse button to return to the
previous menu.