Technical data

Boot the Operating System
PowerPC Open Firmware Quick Start Guide 23
Perform Auto-Scan Boot Operation
To do an auto-scan boot, use the keyboard or mouse to:
1. Select the Boot an Operating System from the Main Menu.
2. Select Perform Auto-scan Boot Operation from the
submenu.
Trying..., boot Failed
Trying..., fdisk0 Failed
Trying..., cdrom0 Failed
Trying..., tape0 Can’t rewind tape
Failed
Trying..., enet0 Booting
Please wait while the system is booting
Boot device: /pci/ethernet@e:144.191.24.252,˘sr
mp\carloss.elf,144.191.24.76,0
.0.0.0 File and args: ˘srmp\carloss.elf
-
Help on Booting the Operating System
Selecting this menu option gives you general help on the boot
process for your operating system. See the documents that came
with your current operating system for further details.