Technical data

Icons
PowerPC Open Firmware Quick Start Guide 13
Click this icon to run the extended selftests on your
PowerPC system or board.
If security? = false any user level can execute this
option.
If security? = true, security-mode must be set at
advanced or higher.
Click this icon to reset your PowerPC system.
This option may be executed by any level of user
regardless of the security? value.
Click this icon to reset your NVRAM variables to their
original default setting. Warning: Use this icon with
caution as you may lose user-speciÞc NVRAM
settings when you choose to return to the default
settings.
If security? =
false this icon does not display.
If security? = true, security-mode must be set at
administrative level.
Click this icon to go to the Command Line Interface
(ok prompt).
If security? = false this icon does not display.
If security? = true, security-mode must be set at
administrative level.
Click this icon to modify any of the conÞguration
NVRAM variables.
If security? = false this icon does not display.
If security? = true, security-mode must be set at
administrative level.
Click this icon to modify any of the boot-related
NVRAM variables.
If security? = false this icon does not display.
If security? = true, security-mode must be set at
administrative level.
Icon Description