User Manual

Seagate SkyHawk Product Manual, Rev. J 26
www.seagate.com Configuring and Mounting the Drive
3.4 Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting
holes. Refer to
Figure 6 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.140 inch (3.56mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
Figure 3 Mounting dimensions (8TB)
1.432±.019
2
4X 6-32 UNC 2B
3 MIN THREAD DEPTH
.14 MAX FASTENER PENETRATION
MOUNTING HOLE.
MAX TORQUE 6 IN/LBS
Y
B
146.99 MM
2X 6-32 UNC 2B
3 MIN THREAD DEPTH
.14 MAX FASTENER PENETRATION
MOUNTING HOLES BOTH SIDES.
MAX TORQUE 6 IN/LBS
Z
Y
1.028 MAX
26.11 MM
.142±.015
2
C
L
OF DRIVE
C
L
OF DRIVE
C
L
OF CONN
Z
Temperature
Check Point
2X 3.000 ± .010 in
76.20 ± .25 mm
2X 1.625 ± .020 in
41.28 ± .51 mm
.127 ± .010 in
3.23 ± .25 mm
2.000 in
50.80 mm
.814 in
20.68 mm
4.000 ±.010 in
101.60 ±.25 mm
3.750 ± .010 in
95.25 ± .025mm
2X 4.000 ±.010 in
101.60 ±.25 mm
2X 1.122 ±.020 in
28.50 ±.51 mm
.250 ±.010 in
6.35 ± .25 mm
5.787 in MAX