Technical data

U26140-J-Z146-3-76 39
8 mm MTC drives Technical data
The following messages may appear while the tape is being cleaned:
The following code loading messages may appear when new firmware is being
loaded:
I You should contact your corresponding Service department if the
suggested solutions to tape activity, cleaning and code loading
messages are unsuccessful.
Cleaning message Meaning – possible solution
CLEAN REQD Drive should be cleaned immediately
CLEANING... Cleaning is in progress
USE NEW CARTRIDGE The cleaning cassette is used up; the cassette will
be ejected
Ê Use a new cleaning cassette
MUST CLEAN Cleaning is essential (after a cassette with lower
capacity has been used)
Code loading messages Meaning – possible solution
LOADING CODE New drive firmware is being loaded. If this is
successful, the drive will execute an automatic
reset
CODE LOAD FAIL
RETRY CODE LOAD
Indicates that the LOADING CODE action has not
been successful
MAKE CODE LOAD TP Drive makes a copy of CODE LOAD on tape