Technical data

U26140-J-Z146-3-76 11
Quarter-inch cartridge tape drivesHandling quarter-inch magnetic tape cart
r
Removing a quarter-inch magnetic tape cartridge
You must always wait until the access indicator is no longer illuminated, i.e. until
the tape in the cartridge is no longer in motion.
Ê Open the drive flap by pressing the release button.
Ê Remove the cartridge as shown in the diagram
Figure 6: Removing a quarter-inch magnetic tape cartridge
Ê Close the drive flap or insert a different cartridge and close the drive flap.
2.4 Handling quarter-inch magnetic tape
cartridges
Magnetic tape cartridges with a capacity up to 4 GB (QIC-4GB cartridge) are
available for the quarter-inch tape drive.
In order to achieve the best possible recording quality, it is recommended that
the magnetic tape cartridges supplied by your local Fujitsu Siemens Computers
office are used. These cartridges are precisely matched to the characteristics
of the drive.
Magnetic tape cartridges can be ordered directly by calling your local Fujitsu
Siemens Computers office (see the chapter “Accessories” on page 87).