Specifications

Field SenAce Handbook for SGI
Configurnlions
Graphics-MGl Adapter
The MGl VME adapter adapts single-board graphic subsystems to the Crimson's
9U VME format The graphics subsystem fits into the MG1 frame and connects to
the connector
on the MG1 PC4 board., which also contains logic ASICs that enable
the single-boards graphics.subsysteems
to run in the Crimson.
...................
..................
.......................................
.......... " ._ ........ " ... " ..........
........
...
..................................
.........
...................................
.. :
.. :
:
:.
....
... ,
_" ..-.... - .......
. .-__... ..."._..
..... _..
: .--..-. " ... ^ "1
........ ..............
.......................................
,:.:..::.:.:. 3 .I............. ':':.... ...... ..
_ _. .,._..
....................
.....................................................
f--..:.:::
... .................. ...........
.
.-......
..__....
"
... ..............................
.-
- .......
......
I
I In1 -'x
I
-.....
I
I
uuu -'
I
1
- MGltnme
- Mol
PcAboud
Comments
1. The MGl is required to adapt all single-board graphics subsystems (Entry, XS,
XS24. Elan, and EX) to a Crimson chassis.
2. The video cable for single-board graphics subsystems connects the subsystem to
a 13W3 connector mounted on the system bulkhead at the front of the chassis.
3. Any ejector clips on an LG2 or GR2 board must be nmoved before those boards
can be installed in the MG1 adapter.
CD Great Eastern Technology 11/96
2 - 23