Specifications

.:::.:
..:
Table Cl-System Fails POSTS
When a failure occurs during the POSTS, the system displays Mor information on
the graphic console and an ASUI terminal connected to the diagnostics port (serial
port 1); system displays error message indicating the test that failed.
See the table below for decoding the diagnostic messages.
POST Message
Failing FRU
Memory address test ’ Group 1 SIMMs, CPU board
Slzing Caches test failed
CW, 1038. Group 1 Sl”s
UART test failed
~~
CPU board
Timerklock test failed CPU board
Floating point unit test failed CPU board
Sync bus controller test failed
CPU board
VO mapper, INT vectors test failed
CPU, 1038 board
..
SCSl controller test failed
1038 board
System bus test failed CPU, 1038, or backplane
caches test falled
CW board
-_
Full memory test failed SIMMs, CPU board
Memorysizewom SIMMs, CPU board
. ’.
.:
...
. ..
t
4-a
t
Q Great Eastern Technology 11/96