User Manual
Table Of Contents
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive Specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Default logical geometry
- 2.4 Seek time
- 2.5 Start/stop times
- 2.6 Power specifications
- 2.7 Environmental specifications
- 2.8 Acoustics
- 2.9 Electromagnetic immunity
- 2.10 Reliability - Mean Time Between Failure
- 2.11 Warranty
- 2.12 Agency certification
- 2.13 Environmental protection
- 2.16 Corrosive environment
- 3.0 Configuring and Mounting the Drive
- 4.0 SATA Interface
Seagate SkyHawk Product Manual, Rev. B 33
www.seagate.com SATA Interface
100–103
Total number of user-addressable LBA sectors available
(see Section 2.2 for related information).
These words are required for drives that support the 48-bit addressing feature.
Maximum value: 0000FFFFFFFFFFFFh.
ST1000VX005 = 1,953,525,168
ST2000VX008 = 3,907,029,168
ST3000VX010 = 5,860,533,168
ST4000VX007 = 7,814,037,168
ST6000VX0023 = 11,721,045,168
ST8000VX0022 = 15,628,053,168
104 Streaming Transfer Time - PIO 0000
H
105–107 ATA-reserved 0000
H
108–111
The mandatory value of the world wide name (WWN) for the drive.
NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support.
Each drive will have
a unique value.
112–127 ATA-reserved 0000
H
128 Security status 0001
H
129–159 Seagate-reserved xxxx
H
160–254 ATA-reserved 0000
H
255 Integrity word xxA5
H
Note
Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported.
Note
See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.
Table 12 Identify Device commands (continued)
Word Description Value