User`s guide
Restoring Your Drive 31
5
Restoring Your Complete System
To restore your system:
1.
Prepare your hard drive. Partition, if necessary, and format.
2.
Install your operating system.
The following service packs need to be applied: Windows
2000 Server, Service Pack 3. Microsoft Internet Explorer
5.01 or later is required for all windows operating systems.
3.
Reinstall the Maxtor OneTouch software including Dantz
Retrospect Express HD Server. (For more information
see chapter 2.)
4. Open
Dantz Retrospect Express HD Server.
5.
Click
Restore
The next window displays a calendar listing all of your
restore points.
6.
Select the date that contains the restore point you wish
to restore from.
7.
Click the restore point you wish to restore from.
8.
Click
Next.
You are now asked which files/folders you wish to restore.
9.
Place a check next to
My Computer
to select your
entire computer for restore.
10.
Click
Next
.
Now select where you want to restore your files.
11.
Select
To Their original location on
: - to restore them
to the exact location that they were initially copied from.
All data on the current source location will be lost during this
process.
12.
Click
Restore
.
At this point, Dantz Retrospect Express HD Server will
start restoring files to your system. A status bar will
show the progress of the restoration. If needed, you can
press
Stop
to end the restore process.
If your system restore was successful, you can exit
Retrospect.
13.
Click the red ‘
X
’ in the upper right corner of the window.
14. Restart
your computer.
Your system may require more than one restart. Follow any
additional on-screen instructions, if necessary, to complete
your system restore.