Setup guide

Mirra Manual for Macintosh Release 2.2 4
Apple Airport Express
The Apple Airport Express has no LAN Ethernet ports, so there’s no way to connect
your Personal Server to your local network.
You can do one of two things:
1. Purchase a wireless router such as the Apple Airport Extreme that does have
wired LAN Ethernet ports and follow the directions above.
2. Purchase an Ethernet-to-wireless bridge to connect your wireless network to
the wired Ethernet port your Personal Server requires.
Connecting your Mirra to your Macintosh
The Mirra can be used with one computer or with multiple computers.
Setting Up a Single Computer
Connect your Mirra to a router (such as the Apple AirPort Base Station) using the
Ethernet cable included in your shipping carton. Once connected, your setup should
resemble the one shown in Figure 2~1:
Figure 2~1 Connecting your Personal Server with a Single Computer
In Figure 2~1, your Personal Server is connected to a router which is, in turn,
connected to a broadband modem and to the computer. Some broadband modems
and wireless access points include a router, so your setup might look different.