Computer Drive - DVD/CD Drive User Manual
Table Of Contents
- Preface
- Electromagnetic susceptibility
- Electromagnetic compliance
- Electromagnetic compliance for the European Union
- Australian C-Tick
- Seagate Technology support services
- General description
- Initial setup information
- General information
- SCSI ID jumpers
- Drive termination
- Terminator power
- I/O circuits and data path widths
- Providing adequate cooling
- Mounting the drive and connecting cables
- Formatting the drive
- Quick reference desktop system notes
- Setting the SCSI ID jumpers
- Terminating the drive
- Terminator power
- Other applicable jumper options
- Setting the SCSI ID jumpers
- Terminating the drive
- Terminator power
- Other applicable jumper options
- Setting the SCSI ID jumpers
- Terminating the drive
- Applicable jumper options
Medalist Pro Installation Guide, Rev. B 29
[1] “X” means up to 6 or the maximum allowable number of devices on
the SCSI bus. See Table 4a and system documentation.
Figure 3c. Multiple drive connection to host adapter
Host
Adapter
PCB
Pin 1
(check your
adapter for Pin 1 location)
SCSI ID X
(or last drive)
[1]
SCSI ID 1
SCSI ID 0
SCSI ID 7
Additional
SCSI devices
“N” Model
Drive