Product manual

3.5 Supported Diagnostics Page—Send Diagnostics
This page contains instructions for the drive to make available the list of
all supported diagnostic pages to be returned by a subsequent Receive
Diagnostics Results command. The definition of this page includes only
the first 4 bytes. If the page length is
not zero, the drive shall terminate
the Send Diagnostics command with a Check Condition status. The
Sense Key shall be set to Illegal Request with an additional sense code
of Invalid Field Parameter List.
Supported Diagnostic Pages Page
Bytes
Bits
7654321 0
0 Page Code (00
H
)
1 Reserved
2–3 Page Length (Must Be Zero)
3.6 Translate Address Page—Send Diagnostic
The translate address page allows the initiator to translate a logical block
address into a physical sector address or a physical sector address into
a logical block address. The address to be translated is passed to the
drive with the Send Diagnostics command, and the results are returned
to the initiator during the data-in phase following the Receive Diagnostic
command. The format of the translate address page—Send Diagnostic,
is shown in the following table. The translated address is returned in the
translate address page returned after the Receive Diagnostic Results
Command.
Bytes
Bits
76543210
0 Page Code (40
H
) (1)
1 Reserved
2–3
Page Length
(000A
H
)
4
Reserved
Supplied Format (1)
5 Reserved Translated Format (7)
6
:
13
Address To Translate (3)
62 Medalist Pro 2160N/2160WC Product Manual, Rev. A