Product manual

Notes:
1.
See Section 2.3 on page 18 for detailed electrical charac-
teristics of these signals.
2.
The conductor number refers to the conductor position when
using 0.025-inch (0.635 mm) centerline flat-ribbon cables.
You can use other cable types to implement equivalent con-
tact assignments.
3.
Connector contacts are on 0.050 inch (1.27 mm) centers.
4.
Front-panel LED signal: indicates drive activity for the front-
panel hard drive activity indicator.
5.
Asserted by the host to enable the Motor Start option (Motor
Start enables the motor through the SCSI bus command).
6.
To set up the SCSI bus ID on the drive, the host asserts the
binary code on A3, A2, A1 and A0.
7.
GND provides a means for differential devices to detect the
presence of a single-ended device on the bus.
8
. Refer to notes 4 through 7 instead of installing jumpers
and cables on the options jumper block (J5).
9.
NC means no connection.
10.
The conductor number refers to the conductor position when
using 0.050 inch (1.27 mm) centerline flat ribbon cables.
You can use other cable types to implement equivalent as-
signments.
11.
Connector contacts are on 0.100 inch (2.54 mm) centers.
24 Medalist Pro 2160N/2160WC Product Manual, Rev. A