Product manual

D.2.4 Date Code page (C1
H
)
The Date Code page is shown below. The table summarizes the function
and the default value of each bit.
Bytes
Bits
76543210
0 Peripheral qualifier Peripheral device type
1 Page code (C1
H
)
2 Reserved (00
H
)
3 Page length (03
H
)
4 Year
5–6 Week
Bytes 4
The
year field contains the year, in ASCII, that the firmware
was released.
Bytes 5–6
The
week field contains the week, in ASCII, that the firm-
ware was released.
D.2.5 Jumper Settings page (C2
H
)
The Jumper Settings page is shown below. The table summarizes the
function and the default value of each bit.
Bytes
Bits
76543210
0 Peripheral qualifier Peripheral device type
1 Page code (C2
H
)
2 Reserved (00
H
)
3 Page length (01
H
)
4 Rsrvd MS Rsrvd PE Rsrvd SCSI ID
Byte 4
If the
motor start (MS) bit is 1, the remote start enable jumper is
installed on pins 15 and 16 of the options jumper block. If the MS
bit is 0, the remote start enable jumper is not installed.
If the
parity enable (PE) bit is 1, the parity enable jumper is
installed on pins 17 and 18 of the options jumper block. If the PE
bit is 0, the parity enable jumper is not installed.
SCSI ID is the SCSI ID of the drive.
Medalist Pro 2160N/2160WC Product Manual, Rev. A 123