Product manual

The
Linked
bit is 0, which means that the drive does not
support linked commands.
The
CmdQue
bit is 1, which means that the drive sup-
ports tagged command queuing.
The
Soft Re
bit is 0, which means that the drive responds
to a soft reset with a hard reset.
Bytes 8–15
The
vendor identification
field contains SEAGATE in
ASCII text.
Bytes 16–31
The
product identification
field contains the model num-
ber of the drive in ASCII text.
Bytes 32–35
The
product revision level
field contains the last four
digits of the firmware release number in ASCII text.
Bytes 36–43
The
drive serial number
field contains the serial number
of the drive in ASCII text.
Bytes 44–95
These bytes are reserved; they contain only zeros.
Bytes 96–143
The
copyright notice
field contains the following ASCII
string: “ Copyright (c) 1996 Seagate. All rights reserved.”
Bytes 144–147
This is the
servo PROM part number
field.
Medalist Pro 2160N/2160WC Product Manual, Rev. A 119