Product manual

Byte 0
The
peripheral qualifier field contains a zero, except for
nonzero LUNs, which means that the drive is currently
connected to the logical unit that is issuing the Inquiry
command.
The
peripheral device type field contains a zero, which
means that the drive is a direct-access device.
Byte 1
The
RMB bit is 0, which means the discs are not removable.
The
device type qualifier is user-programmable.
Byte 2
The
ISO version field contains a zero, which means that we
do not claim compliance with ISO 9316.
The
EMCA version field contains a zero, which means that
we do not claim compliance with EMCA-111.
The
ANSI version field contains a two, which means that
the drive complies with ANSI SCSI-2 standard X3.131-
199x.
Byte 3
The
asynchronous event notification (AENC) bit is zero,
which means that the drive does not support asynchronous
event notification.
The
terminate I/O process (TrmIOP) bit is zero, which
means that the drive does not support the terminate I/O
process message.
The
response data format field contains a two, which means
that the inquiry data is in standard SCSI-2 format.
Byte 4
The
additional length field contains 143, which is the num-
ber of bytes contained in the inquiry data beyond byte 4.
This value represents a total inquiry data length of 148
bytes. If the allocation length in the CDB of the Inquiry
command is less than 148, the inquiry data is truncated, but
the additional length does not change.
Bytes 5–6
Reserved
Byte 7
The
RelAdr bit is 0, which means that the drive does not
support the relative addressing mode.
The
WBUS32 bit is 0, which means that the drive does not
support 32-bit data transfers.
The
WBUS16 bit is 0, which means that the drive does not
support 16-bit data transfers.
The
SYNC bit is 1, which means that the drive supports
synchronous data transfer.
118 Medalist Pro 2160N/2160WC Product Manual, Rev. A