Specifications

RN: 4-13
RS3: Software Release Notes for P1 R4.2
P1 R4.x Changes to RS3 manuals
Monitor Upgrades
The following monitor changes have been implemented.
SV — MTCC/SMS CRTs
The color CRT monitor that can be used with the Multitube Command
Console or System Manager is the 21-inch ViewSonic P220F.
The unit operates on either 115 or 220 VAC nominal, 50 or 60 Hz. It is
compatible with both consoles, and has common cable connections.
Setup and controls are described in the manual which accompanies the
unit.
SV — ROS CRTs:
The color CRT monitor that can be used with the RS3 Operator Station
(ROS) is the 21--inch Dell P1110 (ivory) or Dell P1130 (slate).
The unit operates on either 115 or 220 VAC nominal, 50 or 60 Hz. It is
compatible with the ROS, and has common cable connections. Setup
and controls are described in the manual which accompanies the unit.
SP — ROS CRTs:
The color CRT monitor that can be used with the RS3 Operator Station
(ROS) is the 21--inch Dell P1110 (ivory) or Dell P1130 (slate).
The unit operates on either 115 or 220 VAC nominal, 50 or 60 Hz. It is
compatible with the ROS, and has common cable connections. Setup
and controls are described in the manual which accompanies the unit.
IO — Redundancy Display
Corrected redundancy scheme. Was 7/1 corrected to 3/1.
Figure 4.8 shows that the FIC in slot A3 is not being backed up by a
redundant F IC.